步骤一：Objects ->Address book -> InterfaceAddresses:

Edit the following items:

Change lan_ip to 192.168.1.1

Change lannet to 192.168.1.0/24

Change wan1_ip to 172.18.224.253

Change wan1net to 172.18.224.0/24

步骤二：Add a new IP4 Host/Network object:

Name: gw

IP Address: 172.18.224.254

Name: pptp-server-ip

IP Address: 10.1.1.1

Name:pptp-ip-pool

IP Address: 10.1.1.2-10.1.1.100

步骤三:Interfaces -> Ethernet:

The settings for the wan1 interface should be:

IP Address: wan1_ip

Network: wan1net

Default Gateway: gw

步骤四：User Authentication -> Local User Databases.

Add a new Local Userdatabase

Name: pptp-user

步骤五：User Authentication -> Local User Databases ->pptp-user

Name: dlink

Password: dlink

Confirm Password: dlink

步骤六：Interfaces -> L2TP/PPTP Servers.

Name: PPTP-tun

Inner IP Address: pptp-server-ip

Tunnel Protocol: PPTP

Outer Interface Filter: wan1

Server IP: wan1-ip

PPP Parameters

IP Pool: pptp_ip-pool

步骤七：User Authentication -> User Authentication Rules.

Name: PPTP-auth

Agent: PPP

Authentication Source: Local

Interface: pptp-tun

Originator IP: all-nets

Terminator IP: wan1-ip

Authentication Options

Local User DB: pptp-user

步骤八：Rules > IP Rules > Add > IP Rule:

Name: allow-pptp-lan1

Action:allow

Service: all-services

Source Interface: pptp-tun

Source Network: pptp-ip-pool

Destination Interface: lan1

Destination Network: lan1net

步骤九：Rules > IP Rules > Add > IP Rule:

Name: allow-pptp-wan1

Action: nat

Service: all-services

Source Interface: pptp-tun

Source Network:pptp-ip-pool

Destination Interface: wan1

Destination Network: all-nets